Quick Release Swingarm Conversion

From £1250+vat

Our quick release system engineered onto your OE swing arm allows easy and efficient removal/fitting with accurate adjustment of the rear wheel.  We strip the old paint finish, remove the OE adjusting end blocks and fit new end blocks, chain adjusters, spindle and paddock stand lifters.

The swingarm is then checked for alignment and supplied back to you unpainted with the wheel re-spaced, ready for fitting. These conversions will not accept the OE caliper, hence we recommend using an AP, Brembo or another aftermarket unit.

To complement your conversion, we can offer a bespoke bracket to accommodate your caliper, provision can also be made for a rear wheel speed sensor should this be required.
Wheel spindle Socket Guides are also available to assist socket spanner engagement with the wheel spindle.
The swingarm pictured here is a Yamaha R1/M with the conversion completed. Note the price indicated does not include the rear caliper, we would use your donor caliper, or we would be happy to discuss the options and quote you to supply.

Conversion from £1250 + vat

Speed sensor provision – £ depending on spec required.

Caliper carrier bracket – £ depending on spec required.

Wheel spindle guide £35 + vat

Contact us to find out more.